Mild Steel Components:
       Material and Process Specifications:

MS if used on the outside surface:

Fabrication:
1. Cleaned and Straightened
2. Cut to size on shearing m/c
3. Bent using guides and fixtures on bending press (only)
4. All screw holes drilled

Treatment:
1. Alkaline degreasing
2. Water bath
3. HCL acid rerusting
4. Water bath
5. Water bath
6. Phosphating
7. Water bath
8. Cieling for crystallisation

Finish:
IOC beige colour
1. Stoving painting with epoxy based paints (baking in oven) or
2. Powder coating using epoxy based powders

Warning:
If the above treatment is not done properly then the MS components will start rusting in humid climates after a period of one year.

(Please Note:
The specifications and processes mentioned above are a suggestion for proper treatment of materials used in Signages. They in no way indicate absolute figures and also there may be other ways of achieving the same.)